Webinar: Design & Detailing of Low-Rise RC Buildings - Session 1: Guidelines for Economy and Simplified Analysis Methods

Webinar: Design & Detailing of Low-Rise RC Buildings - Session 1: Guidelines for Economy and Simplified Analysis Methods
Resource Types
Webinars & eLearning
Webinars & eLearning

Webinar - Speaker(s): David A. Fanella, Ph.D., S.E., P.E., F.ACI, F.ASCE

This webinar presents general guidelines on how to achieve overall economy in low-rise reinforced concrete buildings and provides information on how to select an economic floor system. Also presented are simplified analysis methods for low-rise buildings, including how to locate the center of rigidity and how to distribute horizontal forces to the elements of the lateral-force-resisting system.

Other sessions in the series:
Session 2:
 Design and Detailing of Beams and One-way Slabs; 11/14/17 (120 minutes, .2 CEU/2 PDH)
Session 3: Design and Detailing of Columns and Joints; 02/13/18 (120 minutes, .2 CEU/2 PDH)
Session 4: Design and Detailing of Two-way Slabs and Walls; 04/10/18 (120 minutes, .2 CEU/2 PDH)
Session 5: Design and Detailing of Diaphragms; 06/12/18 (120 minutes, .2 CEU/2 PDH)
Session 6: Design and Detailing of Foundations; 08/14/18 (120 minutes, .2 CEU/2 PDH)