Design Guide on the ACI 318 Building Code Requirements for Structural Concrete
Resource Types
Publications
Design Guides, Key Publications
Design Guide - 2020
996 pp.; 1st edition
Based on the ACI 318-19 code
With over 990 pages and 140 worked-out examples, this unique Design Guide assists in the proper application of the provisions in the 2019 edition of Building Code Requirements for Structural Concrete (ACI 318-19) for cast-in-place concrete buildings with nonprestressed reinforcement.
Table of Contents (condensed):
Click here to view the full Table of Contents]
Foreword
Acknowledgements
Photo Credits
Chapter 1
Introduction
Chapter 2
Material Requirements and Strength
Reduction Factors
Chapter 3
Design Loads and Load Combinations
Chapter 4
One-way Slabs
Chapter 5
Two-way Slabs
Chapter 6
Beams
Chapter 7
Columns
Chapter 8
Walls
Chapter 9
Diaphragms
Chapter 10
Foundations
Chapter 11
Beam-Column and Slab-Column Joints
Chapter 12
Earthquake-Resistant Structures –
Overview
Chapter 13
Earthquake-Resistant Structures –
SDC B and C
Chapter 14
Earthquake-Resistant Structures –
SDC D, E and F
Appendix A
References
Appendix B
Reinforcing Bar Data
Appendix C
Section Index
The purpose of this Design Guide is to assist in the proper application of the design and detailing requirements. The many design aids and worked-out examples are provided to make designing and detailing reinforced concrete members simpler and faster. The goal is to acquire an understanding of the code requirements and to apply them properly and efficiently.
In addition to structural engineers, this Design Guide is a valuable resource for educators, students, individuals studying for licensing exams, and building officials.
Design Guide - 2020
996 pp.; 1st edition
Based on the ACI 318-19 code
With over 990 pages and 140 worked-out examples, this unique Design Guide assists in the proper application of the provisions in the 2019 edition of Building Code Requirements for Structural Concrete (ACI 318-19) for cast-in-place concrete buildings with nonprestressed reinforcement.
|
Table of Contents (condensed): |
|
|
Foreword Acknowledgements Photo Credits Chapter 1 |
Chapter 10 |
The purpose of this Design Guide is to assist in the proper application of the design and detailing requirements. The many design aids and worked-out examples are provided to make designing and detailing reinforced concrete members simpler and faster. The goal is to acquire an understanding of the code requirements and to apply them properly and efficiently.
In addition to structural engineers, this Design Guide is a valuable resource for educators, students, individuals studying for licensing exams, and building officials.